Solid State Logic Duality 82S6DUA20C User Manual download pdf (Page 70)

DAW Control GuidE

3-20

Duality Operator’s Manual

Hi-Resolution Parameter Display Mode

Holding down the OPTION button while editing a plug-in parameter will show a 9-character version of the

parameter value at the top of the Plug-In Editor display.

The ALT button can be used to open or close the plug-in/pop-up window at any time

Comparing Your Changes

Pressing the COMPARE button allows you to compare any changes made to plug-in parameters with the values

stored before editing. As soon as you change any parameter the COMPARE box will turn yellow. Pressing the

COMPARE button toggles between the settings when you starting editing parameters and the current settings.

Note that the plug-in window must be opened before this function becomes available

Bypassing Plug-ins

The BYPASS button allows a plug-In to be toggled in/out of the signal path in PARAM mode. In INSERT mode,

individual plug-ins can be bypassed by holding down the BYPASS button and pushing the D-pot that

corresponds to the insert you want to bypass. The channel SEL button can be used to bypass all the plug-ins on

a channel.

D-pot Sensitivity

The Plug-in Editor’s D-pots can be set to one of two modes: Fixed or Velocity-sensitive. In Fixed mode,

turning a knob will range through the complete list of available parameters; this allows you to search through

long lists very quickly. Holding down the ALT button enables a finer resolution scroll function. In Velocity-

sensitive mode, the speed of scrolling is dependent upon how quickly you turn the D-pot. To toggle between the

two modes press the F5 button in the Fkys menu.

Note that the channel D-pots only operate in Fixed mode

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 126 127

No comments

Solid State Logic Duality 82S6DUA20C User Manual Page 70