Solid State Logic Duality 82S6DUA20C User Manual download pdf (Page 105)

To return all faders to Absolute, use the JOIN or REVISE buttons until the ‘global’ rollback memory is reached,

at which point all faders will return to write either at their current position (REVISE), or at the levels they had at

the global rollback point (JOIN).

DDiissccaarrdd

If the system is in play or stopped following a rollback operation, pressing the Discard soft key, or the

dedicated DISCARD button, clears any data recorded since the start of the rollback pass, forces all channels in

write back to the read/write state they were in prior to the rollback operation at the point in time the Discard

function was operated, and restores the active rollback points from the previous pass.

UUppddaattiinngg aa MMiixx PPaassss

To update a Mix Pass, first select the desired mix

on the List Mix page by scrolling with the lefthand

rotary encoder and pressing the encoder switch.

***Mix Pass #*** will be displayed (see left), and

the selected mix will now become the reference

mix.

The FSM soft key will toggle all faders between

Absolute and Replay or Trim and Replay (see

below for more on Trim status).

PPrrootteeccttiioonn MMooddeess

When you update a previously stored mix, three different data protection modes become available: Auto, Safe

and Manual.

Auto If moves need to be rewritten from scratch, faders can be dropped into write at the

start of a mix by pressing the fader status button. Alternatively, they can be

dropped into write once the mix is running, either by using the fader touch sensor

(motor faders on), or by pressing the fader status button.

Safe Existing fader and cut automation data can be protected with the Safe option.

When channels are in Safe, automation data is replayed but no data can be

written to these channels.

Manual Existing automation data is protected and the fader and cut switch act directly on

the channel audio. No automation is written or played back.

To select the different protection modes, press the ASM soft key, and then press the fader status button on the

desired channel to toggle between the modes, as displayed in the scribble strips above the faders. To select a

mode globally, press the ASM key and then press the FSM key until the required mode is selected.

Mix Enabled

***NEW MIX***

you may adjust status now.

Press Execute to continue

xecute

ancel

Project 16 :: Title 1

Misc

Moff

TLockTrim Snap AT

SSL

Auto

Lnks

Misc

Mix Enabled

xecute

ancel

Project 16 :: Title 1

Misc

Moff

TLockTrim Snap AT

SSL

Auto

Lnks

Misc

MIX PASS 1:

you may adjust status now

Press Execute to continue

ASM

Duality Operator’s Manual

Updating a Mix Pass

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 126 127

Comments to this Manuals

No comments

Solid State Logic Duality 82S6DUA20C User Manual Page 105

Comments to this Manuals